Topic Replies Activity
Sigh, new panels: ABC with fm26126A 6 September 19, 2019
SmartMatrix without HW drive 4 September 18, 2019
SK9822 digital LED to replace APA102 5 September 18, 2019
SD card set up. Bonus! 2 questions in 1 6 September 18, 2019
New P2, 1/32 Scan, 64*64, Led panel with different IC chip controller 29 September 14, 2019
Teensy 4.0 Released 19 September 14, 2019
Aurora und sm4 teensy 3.6 error 3 September 12, 2019
Wifi-enabled animated GIF-Display with NTP Clock and SD Card possible? 3 September 12, 2019
Compiling errors with Aurora + Smartled V4 + Teensy 3.6 4 September 12, 2019
Pinball DMD Frames 4 September 4, 2019
[SOLVED] Should an ESP32 be able to drive 8192 leds ? (128x64) / 4x(64x32) 8 August 15, 2019
Getting Started with SmartMatrix 13 August 8, 2019
[SOLVED] How should I arrange 4 panels and will they work? 8 August 7, 2019
Modify code for 64*64 pixel, HUB75E, 1/32 Scan led panels 52 August 5, 2019
Color depth to 12bit 5 August 5, 2019
Can't link up two(2) 64x32 displays ! Shouldn't it be "plug and play" simple? 20 July 31, 2019
Explanation of DMA, GPIO and memory 4 July 30, 2019
Some new panel maps 1 July 26, 2019
SmartMatrix Panel Map Setup 3 July 26, 2019
Quick pin mapping question 2 July 26, 2019
Teesny 3.2 and V4 board issue 4 July 26, 2019
SmartMatrix_GFX installation 7 July 22, 2019
APA102, APA107 (NS107S). SK9822 pixel LED? 7 July 22, 2019
52x52 Panel (1:13) Scan 8 July 20, 2019
Story of evolution to smartmatrix from a few non addressable LEDs 2 July 12, 2019
Only red color with teensy 3.6/Smartled shield V4 4 July 7, 2019
Modify for 52x52 LED Panel 7 July 3, 2019
Variable size gifs? 4 July 3, 2019
IR remote with Smart Matrix/Teensy 3.6 5 June 17, 2019
Rgb panel with esp 32 4 June 15, 2019